Shenzhen / Hotel Key Card Manufacturing Factory

NFC Wood Card Customization: Common Wood Species, Laser Engraving

NFC wood cards are selected by species; cutting, engraving, finishing, and chip encapsulation are completed on our own line. CR80 standard size, with laser engraving as the main surface method and grain varying card to card.

  • Common species: chosen by color depth and grain
  • Surface process: mainly laser engraving, with engraved infill
  • Chip configuration: NFC chips embedded to the specified model
DONGKA Smart NFC wood card / fanned wood key card photo
Cutting, engraving, finishing

After the wood arrives, it goes through cutting, sanding, engraving, and lacquering; chamfering and infill depend on the species. Project samples are made to artwork first, then mass production after grain confirmation.

Laser engraving with infill

The laser burns into the wood surface to form a recess that does not wear off under normal use, unlike ink printing that fades with friction.

Embeddable NFC, 13.56MHz

Wood cards can be slotted to embed an NFC tag; low-frequency cards need a buried coil, which changes thickness, so sample first to confirm structure.

SPECIFICATION

NFC Wood Cards: Standard Specifications

Wood is a natural material with normal variation in size and color. Tolerances and color differences are confirmed by physical sample before mass production.

NFC Wood Cards: Standard Specifications
Standard size85.6 × 54 mm (CR80), with 1–2 mm natural tolerance; custom shapes per artwork
Thickness1.2–2.0 mm (depends on species and slotting)
Base materialWalnut / sapele / cherry / beech / bamboo / oak / maple / basswood
Chip modelNTAG213, 215, 216 / Mifare Classic 1K (S50) / EM4100 / T5577; chip-free versions also available
Operating frequency13.56 MHz (NFC / IC) or 125 kHz (low frequency, requires slotted coil)
Surface processLaser engraving (monochrome), UV color printing, hot stamping
Optional finishingEngraved infill, matte clear coat, edge chamfer, hollow-out, punching and stringing
Sampling lead timeSchedule provided after artwork confirmation
Production lead timeSchedule provided after artwork confirmation

We produce cards to the chip model you specify; the chip is encapsulated inside the card. Writing and encryption are completed by your lock provider or hotel.

We only manufacture hotel key cards. We do not make door locks, nor provide smart-hotel or apartment systems, nor lock-system integration.

About the Natural Material

  • Dimensional tolerance ±1–2 mm is normal machining range
  • Natural color and grain differences cannot be made identical
  • Final results follow the confirmed sample, not the on-screen image

Slight color variation within a batch is also possible and is a natural wood property.
Grain differences within a batch stay within the approved color range; we do not promise identical matching across batches.

WOOD SPECIES

Common Wood Species: How to Choose

The same artwork on a different wood gives different material color, grain, and laser-engraved contrast. Below, from darkest to lightest, we describe each common species' real photo color card, what artwork it suits, and what to watch in sampling. Natural color and grain cannot be identical; seal a physical sample by the actual process before mass production.

Walnut wood card photo

Walnut

Near-black deep brown base with strong figure and ripple contrast. The carbonized engraving sits on the dark base and makes the logo pop, suiting dark, sober hotel themes. Batches vary in depth; seal a sample for color before mass production.

Sapele wood card photo

Sapele

Red-brown with satin stripes and visible grain relief in raking light. Engraving reads more three-dimensional than on light woods and pairs with Chinese or vintage layouts. The interlocked grain means engraving depth varies slightly across a card.

Cherry wood card photo

Cherry

Warm red tone, fine grain, slowly darkens with light and time after finishing. Suits warm spaces, guesthouses, and resorts. This is wood oxidation, not fading; record the sealed-sample color and match mass production to it.

Beech wood card photo

Beech

Light yellow-brown, even fine grain that does not compete with artwork. Small elements like fine text, room numbers, and QR codes engrave clearly, suiting information-dense layouts. The light base gains contrast from carbon depth; engraving settings are tuned to the sample.

Bamboo wood card photo

Bamboo

Light straight grain with visible nodes on the bamboo panel. Among the species its color variation is small, making it the choice for chain stores and large replenishment runs that need uniformity. Node positions are random and not perfectly aligned even within a batch.

Oak wood card photo

Oak

Light with bold cathedral grain and coarse pores and pronounced relief. Suits large-color-block logos and rugged natural layouts; fine text and QR codes get lost in the grain, so not recommended. Engraved edges are slightly rougher than on fine-grain woods—check a sample first.

Maple wood card photo

Maple

Even light color, fine grain, dense texture. UV color printing shows accurate color on this light base, with clean thin lines and small text, suiting cards with color graphics. Light surfaces show fingerprints easily, so a matte clear coat is advised.

Basswood wood card photo

Basswood

Very light with faint grain and a soft, fine texture; engraved lines stay clean and fine patterns and hollow-outs are easy. Being softer, edges dent easily, so do not skip chamfering and clear coat after cutting.

Choose material to the artworkKeep fine text, room numbers, and QR codes off coarse-grain woods; dark bases suit light engraved contrast.
Follow the sealed sampleNatural color and grain cannot be identical, even within a batch. Make a physical sample before mass production and match color to it.
Sample by the actual processEngraving depth, infill, and clear coat all shift color—do not judge from a flat on-screen layout.

FINISHING

Overlay Surface Finishes

Wood cards rely mainly on engraving, with infill and hot stamping as overlays. Full-bleed color printing covers the grain; most projects use partial color while keeping large wood-grain areas exposed.

Laser engraving Engraved infill Gold / silver foil UV color printing Screen printing Hollow-out Custom cutting Punching and stringing Edge chamfer Matte clear coat NFC slot encapsulation

WHERE IT WORKS

Use Cases

Guesthouses / boutique hotels

Suits smaller properties; pair with bamboo energy cards in the same batch for consistent tone, and we mail wood samples for comparison first.

Resorts

The natural wood grain on the card face can be produced with wood key fobs in the same batch, as a checkout keepsake.

Design hotels

The grain itself forms part of the layout, suiting hotels that avoid full-bleed printing; dark wood with a gold-foil logo is more restrained than color printing.

Scenic / cultural-creative

Custom shapes need no steel mold and can follow a building outline or IP figure. Wood tags and key fobs suit retail settings.

FAQ

FAQ

Are wood cards waterproof? Will they crack if guests take them?

Not for soaking, but fine for daily use. Edge chamfer plus matte clear coat seals the card, and we control base moisture, so wet hands, drink spills, and rain are no problem. Any wood product risks damage under long sun exposure in a car or if left wet without drying.

Can wood cards be read by the lock?

A chip can be encapsulated inside to the model you specify. The common wood-card method slots an NFC tag (NTAG / Mifare Classic 1K (S50)) at 13.56 MHz; low-frequency cards need a buried coil that changes thickness, so sample first. We produce cards to the chip model you specify; the chip is encapsulated inside the card. Writing and encryption are completed by your lock provider or hotel.

What if the wood card color differs from the photo?

Solid wood has natural color variation, with slight differences even within a batch. Before mass production we make a physical sample for your confirmation; the sealed sample is the standard, not the color-card photo or screen display.

Can they be made in custom shapes? Do we need a mold?

Yes—leaf, hexagon, building outline, or brand-logo shapes can all be cut. Wood custom shapes need no steel mold; CNC or laser cutting produces them directly, even in small batches, with only a one-time toolpath programming fee.

Request a Quote

Provide the use, room count, wood species, and chip model. We mail wood samples free; sample after confirming grain and feel.