Shenzhen / Hotel Key Card Manufacturing Factory

DONGKA Smart: A Shenzhen Factory Focused on Hotel Key Cards

Shenzhen Dongka Smart Technology Co., Ltd. was established in 2010 and is an RFID smart product manufacturer integrating R&D, production and sales. Its main products are hotel smart cards, NFC wood cards, epoxy cards, silicone wristbands, key fobs and inlays — RFID smart products.

  • Main products: Smart cards / NFC wood cards / Epoxy cards
  • Production: In-house lines, customized to artwork and chip model
  • Inspection: First-article confirmation, batch sampling

COMPANY PROFILE

Shenzhen Dongka Smart Technology Co., Ltd.

Shenzhen Dongka Smart Technology Co., Ltd. was established in 2010 and is an RFID smart product manufacturer integrating R&D, production and sales. Its main products are hotel smart cards, NFC wood cards, epoxy cards, silicone wristbands, key fobs and inlays.

We only manufacture hotel key cards. We do not make door locks, nor provide smart-hotel or apartment systems, nor lock-system integration.

Guided by the principle of being customer-centered, quality first, operating with integrity and providing quality service, the company relies on a mature technical system and strict quality control to provide customers with one-stop RFID smart card customization solutions.

Since its founding, the company has pursued a branded development path, cultivating the market with strong technology, stable quality and attentive service; it upholds the enterprise spirit of honesty, realism, pragmatism and steadiness, and is committed to becoming a long-term partner that customers can trust.

Contact Us
Front-desk sign of Shenzhen Dongka Smart Technology Co., Ltd.

Company front-desk sign

PRODUCT CENTER

Product Center

Main RFID smart products include smart cards, NFC wood cards and epoxy cards; card base, chip and surface finish can be selected per project. Detailed specs are on each product page.

Comparison of three materials
ItemSmart cardNFC wood cardEpoxy card
Forming methodLamination & die-cuttingCutting & engravingBase card with resin coating
Common finishesFour-color offset, screen print, foilLaser engraving, UV print, foilColor print + epoxy molding
SurfaceFlat, matte or transparent optionNatural wood grain, varies per cardRaised and translucent
Typical useChain & business hotelsHomestays, design hotelsBoutique hotels, resorts

Specific specs, finish combinations and lead times are listed in the quotation after artwork confirmation.

View all products →

CARD STRUCTURE

How a smart card is made

A smart card is not made in one piece: the printed face, inlay antenna, chip module and base card are aligned layer by layer, then laminated and die-cut. Which layers are used and what material each uses is determined by the chip model and artwork.

Schematic of hotel key card layers: printed face, inlay antenna, chip module and base card

Illustration of layered structure; actual layer count and materials depend on the chip model and artwork.

  1. 01

    Printed face layer

    Four-color offset or screen printing puts the hotel logo and room number on the card base; foil stamping and spot UV are also done at this layer. After printing, the first article is checked before the full sheet runs.

  2. 02

    Inlay and antenna

    The antenna wound from copper wire is buried in the inlay and positioned to the card face size; it is connected to the chip module before lamination, and misalignment cannot be reworked later.

  3. 03

    Chip module

    Encapsulated and embedded to the specified model. After encapsulation, each sheet is checked chip by chip at the test station; defective chips are removed and kept out of the lamination step.

  4. 04

    Base card and finishing

    The base card is laminated with the printed face; a magnetic stripe or signature panel can be added. After forming, it is die-cut to CR80 standard size, with margins and corner radius finished together.

Common card-surface finishes

  1. 01

    Four-color offset / Screen print

    Main printing methods for card-face artwork and hotel logos.

  2. 02

    Foil stamping (gold/silver)

    Gold, silver and matte foil colors for logos and text.

  3. 03

    Spot UV

    Localized raised glossy surface to highlight chosen artwork.

  4. 04

    Laser engraving

    Engraved recess, common for wood-card logos and room numbers.

  5. 05

    Hollow-out and custom die-cut

    Custom outlines or cut-outs per artwork.

  6. 06

    Epoxy molding

    After printing, coated with clear resin to form a raised glossy surface.

View all processes & equipment →

Hotel key cards are what we do best

Send us the card type, quantity, chip model and card-face artwork, and we will quote after checking. If the model is unclear, just send a clear photo of the old card face or the reader nameplate.