Shenzhen / Hotel Key Card Manufacturing Factory

Craft & Equipment: From Printing to Encapsulation

We select surface finishes by material and application: four-color offset printing handles color, hot foil and spot UV create local effects, laser engraving is used for wooden cards, and epoxy forming for epoxy cards. Finishes can be stacked, and the quote lists each selected item line by line. We only manufacture hotel key cards. We do not make door locks, nor provide smart-hotel or apartment systems, nor lock-system integration.

  • Surface finishes: four-color offset, hot foil, spot UV, laser engraving, epoxy forming
  • Options: finishes can be stacked; the quote lists each item separately
  • Sampling: confirm a proof first, then run the production batch
On-site laser engraving machine in the factory

CRAFT SAMPLES

Common finishes for RFID smart cards

Below are physical samples of some finishes: surface gloss via glossy and matte, local effects via hot foil and spot UV, wooden-card engraving and variable data shown on sample cards; more finishes are combined per artwork, and samples can be sent for confirmation.

Glossy finish sample

Glossy

Bright, smooth surface with good color reproduction; common for full-bleed printed key cards.

Matte finish sample

Matte

Non-reflective matte with a fine touch; reads calmer on dark backgrounds.

Spot UV finish sample

Spot UV

Raised local highlights that emphasize a logo or texture; the relief is tangible.

Hot foil (gold/silver) sample

Hot Foil (Gold/Silver)

Metallic sheen applied locally; common for room numbers and borders, especially visible on wooden cards.

Screen-printed gold/silver base sample

Screen-Printed Gold/Silver Base

The card base is printed gold or silver first, then the artwork is overprinted; the base carries a fine pearl luster, more visible on light artwork.

Laser engraving sample

Laser Engraving

Burned into the material to form grooves; the primary process for wooden cards, resistant to wear in normal use.

QR code sample

QR Code

A QR code printed on the card, readable by door locks or membership systems, generated from your content.

Personalized room number sample

Personalized Room Numbers

Room numbers, floors, and brand marks customized per project—consistent across the batch or one number per card.

Variable-data laser code sample

Variable-Data Laser Code

Laser-marked unique code per card; room numbers, card numbers, and member IDs produced from a data sheet.

Bracelet / accessory sample

Bracelets / Accessories

Keychains, bracelets, and similar add-ons finished in post-processing, used for tags and staff cards.

WORKFLOW

Production Process

First confirm the material and application, then select key finishes; the more finishes stacked, the more steps and cost.

Hotel key card production steps: what each step affects
StepWhat it doesEffect on the card
01 Pre-pressLayout, bleed, color mode, and chip-position confirmationDetermines print color accuracy and whether the chip edge is exposed
02 PrintingFour-color offset, screen printing, or UV printingDetermines color saturation and artwork detail
03 SurfaceLamination, hot foil, spot UV, embossingDetermines feel, reflectivity, and abrasion resistance
04 Die-cuttingPunching to CR80 or custom contoursDetermines dimensional accuracy and edge flatness
05 EncapsulationEmbedding the chip, antenna, and coil into the card bodyDetermines frequency, thickness, and structural strength
06 Quality CheckSampling for appearance, size, print, and chip encapsulationDetermines batch consistency

Step order varies by material: wooden cards are engraved then filled, epoxy cards are printed then coated; confirm with a proof.

EQUIPMENT

Equipment & Capacity

Printing, lamination, die-cutting, encapsulation, engraving, epoxy, and quality control are all done in-house. You can book a factory visit to see the equipment and workstations, or we can provide on-site photos.

Printing & Surface

Four-color offset presses, screen-printing tables, lamination, and foil equipment. Dark backgrounds get a white base coat; spot colors can be matched.

Lamination & Die-cutting

Lamination, die-cutting, punching, and custom-shape cutting. Thickness tolerance is set by equipment and material and confirmed at proofing.

Engraving & Epoxy

Laser engraving, CNC custom shapes, epoxy forming and curing, used for NFC wood cards and epoxy cards.

Finish Selection

Send us the card artwork, material, quantity, and application; we propose a finish combination by effect and explain the feel and cost differences.